Ultrasonic flow meters TEPLOKOM Wave M1, etc.

Ultrasonic flow meter Volna-M is designed to measure the average volume flow and the volume of reverse flows of cold and hot water.

• Degree of protection IP67 (IP68 option)
• Backup power supply for up to 48 hours (optional)
• Symbolic 2-line indicator with backlight
• Two universal outputs (frequency, pulse, logic)
• RS-485 (ModBus RTU, CSD/GSM Data transmission)
• USB (archives, configuration)

• Volna-M. Operation manual.
• Volna-M. Description of the type of measuring instrument.
• Volna-M. The questionnaire.

---

ULTRAHEAT 2WR7 – ULTRAHEAT 2WR7 ultrasonic flow meter is designed to measure flow in water heat exchange systems using ultrasound.
The 2WR7 flowmeter is designed to be connected to calculators in systems for measuring heat or cold consumed in water supply systems. The readings of the flow meter itself can, if necessary, be taken through the optoport. It is not suitable for systems with water-glycol mixtures.

• 2WR7 User Manual

---

US800 – Ultrasonic flow meter the US800 liquid meter is used for commercial and technological accounting of expenses and volumes of liquids flowing under pressure in a pipeline with a diameter of 15-2000 mm, followed by the output of the measured parameters to the indicator, PC, GSM modem, calculators, regulators, controllers of the automated control system, thermal calculators (SPT, CGT, Carat, VTD etc.).

RUS-1 – Ultrasonic flow meter-meter RUS is designed to measure the flow of drinking water, hot and cold water supply, heating water, wastewater, petroleum products and other liquids flowing through one (two) metal pressure, fully filled pipelines.

RUS-1M – Ultrasonic flow meter-meter RUS-1M is the optimal solution for use on multi–tube water and heat supply systems. Functionality: measurement via 4 channels; self-diagnosis of operation, data archive; accounting for reverse flows; RS232/485, Modbus RTU, current.output; galvanic isolation from the pipeline.

RUS-1A – Ultrasonic flow meter RUS-1A is the optimal solution for composite heat meters with fully autonomous power supply, remote water supply systems. Functionality: self-powered by 3.6V lithium battery; archive of hourly and daily consumption values; RS232/485, pulse output.

RUS-1 1Exib II BT5x – Ultrasonic flow meter RUS-1 1Exib II BT5x - for measuring the flow and volume of various liquids and petroleum products with a kinematic viscosity from 0.2 to 200 mm2/s flowing through metal pressure pipelines. Functionality: monoblock or separate design with the possibility of removing the electronic unit to a safe zone; programming and reading the archive via a PC; archiving of consumption data: hourly archive - 9 months, daily archive-4 years; storing information about the accumulated volume and programmable parameters in memory; indication of measurement and programming error codes.

---